HSS X-treme 2.0
Cutting high tensile steel tubes & profiles on a very high performance level
X-treme 2.0 embodies the best features of both the Fusion and Power saw blades.
Due to a stable, flat hub and improved conicity of the cutting area, X-treme 2.0 saw blades offer a stable and highly accurate solution when cutting high tensile steel tubes and profiles on a very high performance level.
Advantages:
- Stable flat hub for high stability and accuracy
- Extremely narrow tolerances in blade thickness
- Optimized surface finish
- Low friction coefficient
- Very high temperature resistance
- Improved blade tensions
- More regrinds per blade, therefore lower cost per cut
- Narrow tolerances in side run-out
- To be used with spray mist or emulsion coolant for maximal results
- For relevant applications, a recoating program is available
Applications:
- Cutting steel tubes and profiles with a tensile strength up to 1000 N/mm2
- Suggested cutting speed: 120 – 260 m/min
- Feed: 0.04 – 0.22 mm/tooth.
- Machines: High quality automatic
OVERVIEW DIAMETERS HSS X-TREME 2.0 SAW BLADES |
||||||
Diameter (mm) |
Kerf (mm) |
Bore hole (mm) |
Teeth | |||
225 | 2,5 | 32 / 40 | 64 / 80 / 120 / 150 / 180 / 220 | |||
315 | 2,0 / 2,5 | 32 / 40 | 72 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 200 / 250 / 320 | |||
350 | 2,0 / 2,5 | 32 / 40 / 50 | 80 / 90 / 110 / 120 / 140 / 160 / 180 / 220 / 280 / 350 | |||
370 | 2,5 | 40 / 50 | 70 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 190 / 220 / 300 | |||
400 | 2,5 / 3,0 | 40 / 50 | 70 / 80 / 90 / 100 / 128 / 140 / 160 / 180 / 200 / 250 / 320 | |||
425 | 2,5 / 3,0 | 32 / 40 / 50 | 70 / 80 / 100 / 110 / 120 / 130 / 140 / 160 / 180 / 220 / 260 / 350 |